HOME COMPANY MOSAIC ART PRODUCTS
Mosaic, Glass Mosaic, Mosaic Tile, Swimming Pool Tile, FoShan Longart Building Decoration Materials Co. Ltd
PROJECTS SERVICE CONTACT
x
x

Login

EMAIL*

PASSWORD

Don't have an account?

CREATE ONE
HOME COMPANY MOSAIC ART PRODUCTS PROJECTS DESIGNER CUSTOMIZED SERVICE PROCESS DOWNLOADS CONTACT US MARKETING MATERIALS
x

A Few Simple Steps to Teach You How to Apply Glass Mosaic Tiles.

2022-07-28

Glass mosaic tiles are a popular tile at the moment, and are widely used in home design nowadays for their small size and colourful advantages. Have you already bought your beloved glass mosaic tiles? (Come to LONGART MOSAIC for more options.) Do you know how to apply glass mosaic tiles?

 

◆Brushing glue

Brush glue is the key to paving a good glass mosaic, ready to mix in accordance with the proportion of strong tile glue, using a plastering knife to apply tile glue on the wall, pay attention to the amount of application can not be too much. First apply the glue on the wall, then use a smooth plastering knife to apply the glue until even, the general thickness of the glue is about 20mm can be. Note that the mixing of good mosaic adhesive slurry should be controlled according to weather conditions in 2-3 small is used up.

 

Longart mosaic glass ties.jpg


◆Tiling

After brushing the glue, the glass mosaic in accordance with the drawings aligned seam paving, with a plaster knife or putty shovel will be glass mosaic paste tight, or with a flat thick wooden board pad on the surface of the glass mosaic, to rubber hammer evenly knocked to ensure that the paste firmly. As each small piece of glass mosaic with a net to fix, so stick on the wall, the glue seeped into each tiny grid to achieve a fixed effect.

 

◆Checking the tiling

After tiling a certain range of glass mosaic, check the paving situation. First of all, the gap between the tile and the brick must be determined as a uniform width, so that it depends on the use of a small grey shovel to adjust the grey joints, which is the process of paving glass mosaic in the process requires the most patience, but in the process of paving work is the most important link. In addition, the paving of a good glass mosaic to check the gap, will fall off the small pieces of glass mosaic to fill.

 

◆Hooking the seams

After inspection, when the moisture is moderately dry and with the initial strength, to start hooking, prepare the required caulking, with a plastering knife will be hooked into the glass mosaic gap, pay attention to each scraping slurry area of no more than 2 square metres. Apply the caulking evenly to the surface of the glass mosaic, making sure that all the joints are completely filled and that there is no excess residue. Take care to gently dry the surface of the glass mosaic with a damp cloth within 20-25 minutes after caulking.


You may know some mosaic glass tile manufacturers, but LONGART MOSAIC is more than a supplier, it cherishes mosaic culture, combining contemporary design with traditional craftsmanship to create a range of constructive and warm architectural and environmental artworks that can give you a warm and unique enjoyment for customers around the world who have a strong need for spatial art.


6-3.png